Troubleshooting 10 Most Common AC Problems

Air conditioning is a basic need in Mississauga, and life can be really unendurable when it comes to air conditioner breakdowns. Getting an immediate repair can be costly, so it’s vital to ensure your air conditioner is in excellent condition through standard upkeep. Furthermore, it’s consistently really smart to know about a portion of the more normal issues that can emerge within your air conditioner.

Getting your Air Conditioner fixed is no big deal, you should only know how to address the problems thoroughly and you’d be good to go. Monitoring the most well-known issues with AC units is gigantic assistance in anticipating breakdowns beforehand. Well because who needs to be stuck inside during a hot summer with no air conditioner? Watch for these ten common issues:

1. Clogged or dirty filter

One of the many reasons why an air conditioner won’t work properly is because of a clogged or dirty filter. Fixing this is as easy as pie, all you have to do is just follow your manufacturer’s suggestions as to how often you should change your air filter. Some of the filters are supposed to be cleaned monthly, others at regular intervals, while some are reusable and ought to be cleaned when they are filthy. One method for deciding whether a filter should be cleaned is to check if any light goes through it. If the light doesn’t pass through, now is the ideal time to clean it. Filthy filters lessen the progression of air as well as cause the air conditioner unit to freeze.

2. Fixing thermostat

Another reason why your air conditioner won’t work could be due to its thermostat (which maintains the temperature setting in your home). If the thermostat is turned on, its insides are dirt free, its level is maintained, it’s not being affected by sunlight, and it’s on the correct setting and the air conditioner would still not work then there may be another issue that needs to be addressed. To figure it out you must seek out professional help.

3. Refrigerant Leaks

If the coolant in your air conditioner starts to leak, it would impact your air conditioner to not perform correctly and your air conditioner will not be able to maintain the temperature thoroughly and will fluctuate. In this case, it is important to identify the location of the leak because the cost would depend on that entirely. It is better to get it check by a professional and seek help or it could lead to permanent damage.

4. Drainage

Just as the filters stop working when they are clogged, the drain line works in the same manner. If the drainage becomes clogged, the drain pan will fill up, and water will start to leak out potentially causing damage to your air conditioner unit or whatever is around your pan. This could also lead to permanent damage so make sure your drain lines and filters are dust free at all costs.

5. Thorough working of Breakers or Fuses

The working of a breaker and fuse is to safeguard your air conditioning unit’s motor or compressor from overheating. Often when a motor dies, one of the first parts the HVAC technician checks is the breaker. If that’s the case, then you must immediately call for professional help.

6. Capacitors

The motor that powers the compressor and the fans won’t work without a thorough working capacitor. The start capacitor sends a jolt to activate the motor, while the run capacitor provides a series of jolts to keep the motor working. The Air conditioning unit won’t run efficiently if either burns out. So, make sure that both of the capacitors are up and working at all costs.

7. Compressor

The energy that is required for a refrigerant to carry out heat exchange is provided by a thorough working compressor. The compressor stops working, the Air conditioning unit will not cool your room. If there’s not enough refrigerant, the compressor will run hot and eventually seize or break down. If there’s too much, the refrigerant will return to the compressor, which can cause it to fail. In either case, it is important to look out for your compressor.

8. Evaporator Coils

Evaporator coils are very important as they absorb heat in the air and transfer it back into the room as cold air using a series of air ducts. Coils can become corroded, but if they are located inside it is nearly too possible to clean them by yourself, in that particular case you typically only require maintenance every three years by hiring a professional.

9. Condenser Coils

Condenser coils are located outside of the compressor so they can become dirty due to the elements. They can usually be clean with water once a year, but if they get too dirty, only a certified technician will have to clean them with a chemical cleaner.

10. Worn Contactor

In an Air conditioning unit, there are contractors for the compressor, the blower motor, and the condenser fan motor. They make an electrical connection that starts the motors and compressor. If there’s arcing and pitting on the contactor, it becomes difficult for the electric current to start the motors. If that’s the case you must immediately seek help and get it fixed before it leads to permanent damage.