How To Get The Best Results Out Of Your Plastering Works?

It is only possible to paint the wall if it has been plastered. If there are defects with plastering works, then you can never expect a smooth paint finish. You will only be using up excess paint on the wall. The paint may only have a very rough finish as well.

So it is important to plaster the walls before getting started with the painting task. For the best paint finish, you need good plaster quality. Minor and major damages have to be fixed in advance. You can search for the best “plastering or GIB stopping in Auckland” services. Expert house plastering services guarantee the best results to the clients.

To get the best results with plastering works, it is important to understand the common defects that you can face. It is important to carry out the common fix so quality can be maintained.

Notice uneven surface

One of the most common plastering defects can be visible in the form of an uneven surface. If the surface is left out uneven after plastering the surface, then this is a common defect. You often notice this defect if the plastering task has been performed by an unskilled worker.

To overcome this defect it is important to get the job accomplished by a professional plastering team. Performing this task on your own can also be a big mistake.

De-bonding defect

The moment you apply plaster to the wall, it will form a strong bond with the surface. This bond will hold the plaster material in place for years. It offers strength to the surface as well. But if the quality of the mix is not appropriate then the plastering material will remain lost.

If the mix is too thick then the plaster will often fall. It does not bond with the surface. To avoid this defect, it is important to check the quality of the mix prepared.


Cracks are also easily visible on the plastering surface. This type of defect may have many different causes. These cracks can be hairline or wide. You should identify the cracks the moment they happen. It is important to repair the cracks on time.


If the cracks are left untreated it can lead to disaster. The water will easily seep through the cracks and reach the inner layer of the wall.


In most cases, you will notice rust stains forming on the surface of the plaster. This defect is common if the plastering material comes in direct contact with the metal beam or rod. To avoid this, a special coating of antirust is applied to the metal beam.

The coating prevents direct contact of the plastering material with the metal. Proper protection will also improve the lifespan of the structure.

Apart from these, you will also notice efflorescence on the surface. The moment the plaster mix is prepared you need to take all precautions. Always let the expert team handle plastering tasks for you.